Ας παίξουμε λίγο με τον madVR

[gkontoletas]

madVR v0.89.3

* NNEDI3/OpenCL now uses D3D11 interop instead of D3D9 interop
* implemented most of the various missing black bar features
* added support for device profiling
* added vertical scrollbar to "profile auto select rules" edit field
* added "smoothmotion" bool value for profile rules
* fixed: sometimes video was zoomed in way too much without any reason
* fixed: black bar detection sometimes had false positives
* fixed: black bar detection sometimes unnecessarily dropped correct detection
* fixed: DXVA processing sometimes broke when stopping & starting the graph
* fixed: sub options were active even if black bar detection was off

 

[gkontoletas]

madVR v0.89.4

* debug OSD now shows black bar, source and target rect details
* added "redraw" command so MPC-HC/MPC-BE can redraw subtitles in paused mode
* fixed: zero target rect / window size made madVR crash
* fixed: native DXVA accepted all formats, even when they weren't supported
* fixed: NNEDI3 OpenCL kernel was compiled even when using super-xbr or NEDI
* fixed: new NNEDI3 interop no longer requires win7 platform update
* fixed: sometimes NNEDI3 chroma doubling was incorrectly disabled
* fixed: crash when using NNEDI3 with old windowed mode render path
* fixed: option "if black bars change pick one zoom factor" had no effect
* fixed: two deadlock causes when switching between 576i and 1080i videos
* fixed: "keep bars visible if they contain subtitles" = "forever" didn't work

 

[gkontoletas]

madVR v0.89.5

* cleanup image borders can now optionally only crop black bar borders
* implemented "move OSD and subtitles into active video area" option
* madVR OSD now respects screen masking
* optimized OSD APIs to allow media players to respect screen masking
* optimized subtitle positioning for internal MPC-HC/MPC-BE subtitle renderer
* added APIs for media players to set zoom/position modes
* added IMadVRCommand::SendCommandInt("keyPress") support (J.River MC)
* some render code cleanup (fully removed AMD interop hack etc)
* fixed: one cause for shutdown crash with native DXVA decoding
* fixed: OSD fused different luma/chroma NNEDI3 neurons into "image"
* fixed: image enhancements "restore defaults" set LumaSharpen "clamp" wrong

 

[gkontoletas]

madVR v0.89.10

* added SuperRes "sharpness" and "use linear light" options
* optimized SuperRes performance with high "strength" values
* modified subtitle mover to not change subtitle size, anymore
* added "zoom control" option to move subtitles
* added support for LAV DVD subtitle renderer
* fixed: XySubFilter: high-res PGS with smaller-res video: wrong sub position
* fixed: crash when LAV DVD subtitle renderer asked for a flush/clear
* fixed: Smooth Motion + NNEDI3 + Bilinear could cause aliasing artifacts
* fixed: #318: debanding sometimes caused black screen (once more)

 

[gkontoletas]

madVR v0.89.12

* added auto lens memory activation via "IP Control" for JVC & Sony projectors
* added several new profile rule script variables
* added IMadVRCommand::SendCommandDouble("setArOverride") support
* when moving subtitle, margins are now relative to video height
* fixed: memory leak introduced in v0.89.10
* fixed: Catmull-Rom was broken since v0.89.10
* fixed: potential cause for "old frame" flickering when using smooth motion
* fixed: potential cause for "old frame" flickering in new windowed/FSE modes

 

[gkontoletas]

madVR v0.89.13

* added support for rotation (0°, 90°, 180°, 270°) via key shortcut and API
* videos are automatically rotated now, if the container/splitter says so
* improved chroma quality when using DXVA on Intel (and maybe NVidia) GPUs
* improved DXVA processing performance under specific circumstances
* if DXVA is used, brightness, contrast, hue etc is applied by DXVA now
* fixed a couple of DXVA processing related bugs
* Intel/NVidia: DXVA2 image + Bilinear chroma upscaling -> DXVA chroma up
* DVD Navigator AR has now priority over decoder / splitter / bitstream AR
* updated AdaptiveSharpen to 2015-10-29 (experimental) version
* added new profile rule script variables "display" and "variableAR"
* optimized RAM consumption a bit, maybe
* added option to not resume playback after lens memory change
* fixed lens memory activation problem for Sony projectors
* fixed: "runtime" profile variable didn't work properly

 

[MAD]

Νόμιζα, ότι μόνον ο σκηνοθέτης μπορεί να επέμβει, στην εικόνα του έργου του! είτε αφορά τα χρώματα ή οτιδήποτε αφορά την εικόνα! εμείς μπορούμε μόνον να επέμβουμε στο bitrate, μέχρι ενός ορίου!

 

[gkontoletas]

madVR v0.89.14

* added new "sharpen edges" algorithm
* added new "crispen edges" algorithm (tamed FineSharp)
* added new "thin edges" algorithm
* added new "enhance detail" algorithm
* removed SuperRes "radius" option (set to 0.66)
* removed SuperRes "sharpness" option (set near to 2)
* removed LumaSharpen "radius" option (set to 1.0)
* removed LumaSharpen "clamp" option (set to 0.035)
* removed "apply SuperRes first" option (set to true)
* updated AdaptiveSharpen to 2015-11-05 (experimental) version
* optimized "video size has changed" notifications to media player
* optimized aspect ratio overriding API behaviour

 

[m1ts0s]

madVR v0.89.15

* fixed: black screen with some decoders (introduced in v0.89.14)
* fixed: black screen with DXVA processing in some situations
* added "superResRadius" file name tag for testing purposes

 

[m1ts0s]

madVR v0.89.16

* fixed: occasional aspect ratio problems (introduced in v0.89.14)
* fixed: "refine only once" doesn't affect SuperRes, anymore
* fixed: DXVA decoding + deint -> refresh rate sometimes didn't switch

 

[m1ts0s]

madVR v0.89.17

* significant speedups for "sharpen edges" and "thin edges" algos
* small quality change (hopefully improvement?) for "thin edges"
* fixed: repeated frames were reported although smooth motion FRC was on

 

[m1ts0s]

madVR v0.89.18

* added tone mapping support for HDR content
* added gamut mapping support for HDR BT.2020/DCI-P3 content
* added support for SMPTE 2084 transfer function decoding
* added support for receiving HDR metadata from LAV Video Decoder
* added "maximum display luminance" option to display properties page
* added "HDR" profile variable
* SuperRes now supports being run after every ~2x upscaling step (again)
* improved JVC projector ip control connection reliability

 

[m1ts0s]

madVR v0.89.19

* added support for display peak luminance values of 265, 180 and 120 nits
* HDR: gamut mapping is now always on, even if calibration control is disabled
* fixed: DVD/Blu-Ray subs were positioned incorrectly when using DXVA scaling
* fixed: DVD aspect ratio wasn't always shown correctly when using MPC-HC
* fixed: gamma processing and brightness control didn't work for HDR content
* fixed: DXVA decoding + deint -> refresh rate sometimes didn't switch
* repeated frames are displayed (again) when smooth motion FRC is enabled

 

[m1ts0s]

madVR v0.90.0

* added support for 3D decoders (IMediaSample3D)
* added support for 3D frame packed playback via HDMI 1.4+ (requires win8.1+)
* added support for native 10bit 4:2:0 DXVA decoding (+ scaling)
* added "Reconstruction" chroma upsampling algorithm (replaces NEDI option)
* updated SuperRes algorithm for chroma upscaling
* replaced luma upscaling "linear light" with "sigmoidal light" option
* sharpen edges is now ever so slightly brighter than before
* updated AdaptiveSharpen to version 2016-01-07
* fixed: D3D11 presentation crashed NVidia driver if 3D vision was enabled
* if DCI-P3 3dlut isn't selected, BT.2020 3dlut is used instead (if available)
* if BT.2020 3dlut isn't selected, DCI-P3 3dlut is used instead (if available)

 

[m1ts0s]

madVR v0.90.1

* fixed: DXVA processing was broken on some GPUs
* fixed: DXVA upscaling option was grayed out
* fixed: chroma SuperRes fracked up HDR colors
* fixed: LAV reporting YCgCo was misinterpreted by madVR
* fixed: "Reconstruction" was reported by the OSD to be "Jinc"

 

[m1ts0s]

madVR v0.90.2

* fixed: directly entering 3D fullscreen exclusive mode failed
* fixed: trying to do 10bit playback stopped 3D from working
* fixed: D3D11 presentation sometimes got stuck (minimized, Aero Peak etc)
* fixed: LAV reporting double frame rate was ignored
* added 3D content information to OSD, e.g. "NV12, 8bit, 4:2:0 (3D)"
* added 3D presentation information to OSD, e.g. "D3D11 exclusive (3D)"
* 3D playback now always uses 1080p23 display mode
* disabled refresh rate fix logic for 3D presentation (just to be safe)

 

[m1ts0s]

madVR v0.90.3

* frame packed 3D: display mode is now always changed to 1080p23
* frame packed 3D: smooth motion FRC is now always off
* 3D: side-by-side quality is improved (proper scaling instead of Bilinear)
* 3D: added top-and-bottom, line alternative and column alternative modes
* 3D: added "swap left / right eye" option
* profile rules: added "3D" boolean variable
* profile rules: added "+", "-", "*", "/", ":" math support
* profile rules: number fields can now be used on both equation sides

 

[m1ts0s]

madVR v0.90.4

* added Bicubic "sharpness: 150" option (useful for downscaling)
* added Shiandow's SSIM downscaling algorithm
* optimized Direct3D initialization order for 3D playback
* rendering no longer waits for OpenCL or DirectCompute to initialize
* fixed: AMD x64 GPU driver crash (added a workaround, not my fault!)
* fixed: interlaced output resulted in wrong refresh rate detected
* fixed: switching windowed -> FSE with D3D11 could result in black screen
* fixed: screenshots with "use a separate device for DXVA" sometimes failed
* fixed: incoming 4:2:2 content with odd video resolution crashed
* fixed: minor timing issue with D3D11 presentation
* fixed: OSD stopped working when no new frames came from decoder
* fixed: one potential settings dialog crash
* added IMadVRCommand::SendCommandDouble("keepLastFrameOnStop")
* added IMadVRCommand::SendCommandDouble("emptyQueue")
* last video frame is now remembered for 2 seconds when stopping graph
* added "EC_VIDEO_SIZE_CHANGED" information to "mvrInterfaces.h"

 

[m1ts0s]

madVR v0.90.6

* fixed: linear light SuperRes processing got broken in v0.90.5
* fixed: SuperRes chroma processing was broken in certain situations

 

[m1ts0s]

madVR v0.90.8

* fixed: downscaling "a lot" on some GPUs/drivers produced nearest neighbor
* fixed: NNEDI3 doubling + SSIM downscaling could result in green tint