Πωλειται Προενισχυτής Λυχνίας LECTOR LINE-TUBE TYPE M.L.A.
Mε PHONO Kαι Λυχνιες ECC82/12 AU 7, 4 εισόδων (1 PHONO 3 LINE)
Το συγκεκριμενο μηχανημα ειναι εξαετιας σε αψογη λειτουργικη και εμφανησιακη κατασταση.
Tο M.L.A ειναι μια δικη τους πατεντα για να μπορεσετε να αλλαξετε τις ECC82/12 AU 7 με αλλους τυπους λαμπας.
Τιμη 450 ευρω.
ζητω συγνωμη απο τους admins,δεν ηξερα (δεν βρηκα) πως μπορουσα να σβησω το αλλο ποστ μου (που εφτιαξα κατα λαθος) και το παλιοτερο η πως θα μπορουσα να το ανανεωσω χωρις να κανω "up".ευχαριστω πολυ.
Για να μην ψαχνετε στο διαδυκτιο για extra πληροφοριες...τα παρακατω ειναι απο το επισημο site:
The M.L.A. is the first line dedicated preamplifier with exclusive circuity called S.A.T.C. .
This special circuity patented by Lector permit to install any type of double triode directly on circuity.
So now you can use your preferred tube selection without to change the preamplifier, it's drive this tube: ECC 88-ECC 82-6BK7-6CG7-and many others.
From factory we supply the MLA with ECC 82 but after the Customer in future can change the pair of tube with any other double triode at 12 volts or 6 volts filaments.
Many analogies are very near to the VP 04 but the MLA offer better performance in sound and music reproduction.
This is the electronics components inside the MLA
the power supply design with polipropilene capacitors
the output stage use very special handmade capacitors MKP film & foil
the I/O RCA are all gold plated professional grade
all teflon/tefzel wire are used
professional toggle selector pure silver plate
NO local or total feedback circuity used in this design
Discovery the hi-value sound of MLA and if you need a completly phono MM or MC stage use our PHONO LINE PRODUCTS so you can have a completly pure class A outstanding preamplifier system.
CONVENIENCE AND PERFORMANCE
[*]S.A.T.C. kit with all tube for replacement
[*]Direct bias tube optical cathode
[*]No any feedback circuity
[*]Direct PHONO-HI input for external module ( see Phono Products data sheet )
[*]Balancing internaly trimmered channel gain sensibility
SPECIFICATIONS
Input sensibility:200 mV (all line input)
Distorsion:0.1% THD
Preamplifier gain total:23 db
Frequency response:20-20Khz
Tube supply from factory:ECC 82 low noise tested
Output impedance:290 ohm 20v rms
Power supply:220vac-240vac-110vac 35va
Dimension:400 x 85 x 300 (l x h x p)
Weigh net:7.5 kilos
...και καποιες φωτο απο το μηχανημα!
Mε PHONO Kαι Λυχνιες ECC82/12 AU 7, 4 εισόδων (1 PHONO 3 LINE)
Το συγκεκριμενο μηχανημα ειναι εξαετιας σε αψογη λειτουργικη και εμφανησιακη κατασταση.
Tο M.L.A ειναι μια δικη τους πατεντα για να μπορεσετε να αλλαξετε τις ECC82/12 AU 7 με αλλους τυπους λαμπας.
Τιμη 450 ευρω.
ζητω συγνωμη απο τους admins,δεν ηξερα (δεν βρηκα) πως μπορουσα να σβησω το αλλο ποστ μου (που εφτιαξα κατα λαθος) και το παλιοτερο η πως θα μπορουσα να το ανανεωσω χωρις να κανω "up".ευχαριστω πολυ.
Για να μην ψαχνετε στο διαδυκτιο για extra πληροφοριες...τα παρακατω ειναι απο το επισημο site:
The M.L.A. is the first line dedicated preamplifier with exclusive circuity called S.A.T.C. .
This special circuity patented by Lector permit to install any type of double triode directly on circuity.
So now you can use your preferred tube selection without to change the preamplifier, it's drive this tube: ECC 88-ECC 82-6BK7-6CG7-and many others.
From factory we supply the MLA with ECC 82 but after the Customer in future can change the pair of tube with any other double triode at 12 volts or 6 volts filaments.
Many analogies are very near to the VP 04 but the MLA offer better performance in sound and music reproduction.
This is the electronics components inside the MLA
the power supply design with polipropilene capacitors
the output stage use very special handmade capacitors MKP film & foil
the I/O RCA are all gold plated professional grade
all teflon/tefzel wire are used
professional toggle selector pure silver plate
NO local or total feedback circuity used in this design
Discovery the hi-value sound of MLA and if you need a completly phono MM or MC stage use our PHONO LINE PRODUCTS so you can have a completly pure class A outstanding preamplifier system.
CONVENIENCE AND PERFORMANCE
[*]S.A.T.C. kit with all tube for replacement
[*]Direct bias tube optical cathode
[*]No any feedback circuity
[*]Direct PHONO-HI input for external module ( see Phono Products data sheet )
[*]Balancing internaly trimmered channel gain sensibility
SPECIFICATIONS
Input sensibility:200 mV (all line input)
Distorsion:0.1% THD
Preamplifier gain total:23 db
Frequency response:20-20Khz
Tube supply from factory:ECC 82 low noise tested
Output impedance:290 ohm 20v rms
Power supply:220vac-240vac-110vac 35va
Dimension:400 x 85 x 300 (l x h x p)
Weigh net:7.5 kilos
...και καποιες φωτο απο το μηχανημα!
Attachments
Last edited by a moderator:
