ΑΝΔΡΕΑΣ Κ.
Ιδρυτής
- Μηνύματα
- 30.058
- Reaction score
- 731
[reliops=Casio Laser projector burns some stuff][youtube]gF4HG6v29UY[/youtube][/reliops]
Τα διοδικά λέιζερ έχουν μία μικρή απόκλιση ως προς το μήκος κύμματος κατά την διάρκεια ζωής τους, είναι όμως τόσο μικρή που δεν πιστεύω ότι μπορεί να γίνει αντιληπτή. Πχ. το κόκκινο στα 650 νανόμετρα και το κόκκινο στα 645 νανόμετρα είναι πρακτικά το ίδιο για το ανθρώπινο μάτι.
Πανο δεν ειναι πολυ ξεκαθαρο αυτο.Πιο πανω λεει οτι τους ειπε η Casio οτι το λεηζερ χανει σε φωτεινοτητα 10% οταν ζεσταθει σε σχεση με την αρχικη μολις το αναψουν.Ετσι ομως εγω καταλαβαινω οτι καθε φορα που αναβει επανερχεται στην αρχικη φωτεινοτητα,αντιθετα με τις λαμπες που η φωτεινοτητα μειωνεται με τον χρονο.Δες εδώ τι είχε γράψει ο φίλτατος Ντάριν στο αντίστοιχο θέμα στο AVSforum:
Oddly enough, the solid state light sources used in the Casio Hybrid engine do not get brighter as they warm up. To the contrary, they diminish in brightness by about 10% as they warm up to their stabilized operating temperature. Thus, the brightest possible lumen readings on these units are obtained during the first minute of operation, immediately after powering them on. Casio states that they measure brightness within the first minute of operation to determine whether the unit is meeting spec.
...
In addition to these factors, Casio informed us last week that the ambient temperature in the room will affect lumen output.
...
Therefore, we subjected two of our A130 samples to extended runtimes, turning them on and allowing them to run 24/7 until they accumulated 200 hours. The result is that both units lost about 25% of their maximum light potential during the 200 hour test.
...
The lumen degradation in the extended use test was due to a diminishing of the intensity of green and blue, the two colors produced by the laser source. Red, which comes from an LED, stayed comparatively stable.