- Μηνύματα
- 3.092
- Reaction score
- 666
Κορεάτικο High End:
STELLO M200 monoblock amplifier
Specifications
Input Sensitivity 0.83V, 200W / 8 Ohm
Signal to Noise 10-20kHz, -100dB
THD 0.005%, at 1 kHz
Frequency Response 10Hz - 50kHz, +-3dB
Signal Input RCA/Unbalanced, 1 Pair
XLR/Balanced, 1 Pair
12 V Trigger (RCA), 1 Ea
Power Output 200W / Ch at 8 Ohm
350W / Ch at 4 Ohm
Power Requiremnets 100/120/220/230VAC, 60Hz Selectable
Dimension(WHD) 230 x 150 x 457(WHD) mm
Weight 12 Kg (each
STELLO DA220 upsampling digital to analog converter
Features
- Supports 44.1kHz/16Bit (Bypass), 48kHz, 96kHz and up to 24bit / 192kHz Upsampling (Sampling Rate Selectable)
- True 24 Bit Delta-Sigma DAC
- Sixth Order Digital Filter
- Digital Outputs for Recording
- Phase Selection : 0, 180 Degree
- On-chip PLL eliminates Jitter
- Separate transformers for analog and digital circuits
- Full Balanced, Full Class A operation Analog Output Modules
- High quality electronic components and gold plated RCA connectors
Specifications
Digital Inputs Coax1, Coax2 (2 RCA Unbalanced) Inputs : 75Ohm
AES/EBU (XLR) Balanced Input: 110Ohm
Toshiba Link Optical Input
Digital Outputs Coax1, Coax2 (2 RCA Unbalanced) Outputs
AES/EBU (XLR) Balanced Output
Toshiba Link Optical Output
Analog Outputs 1 RCA unbalanced stereo, 1 XLR balanced stereo
Analog Output Voltage 1.3 V rms
Output Word Length 16, 18, 20, 24bits
Dynamic Range 110 dB Typ.
Signal-to-noise Ratio 120 dB Typ.
Distortion 0.003 %, 1 kHZ
0.002 %, 10 kHZ
0.002 %, 20 kHZ
Frequency Range 10 Hz - 55 kHz ( +- 3 dB )
Sampling Frequency 44.1kHz to 192kHz, Selectable 192kHz default
Power Requiremnets 100/120/220/230 VAC, 60Hz Selectable
Dimension 435 x 350 x 85 (WHD) mm
Weight 7.5 Kg
STELLO CDT200 CD transport
Features
- Phillips VAM 1210 transport mechanism is proven to be among the most efficient transports available, with improved readability for all CD, CD-R, and CD-RW audio discs
- The transport mechanism is specially mounted to enhance mechanical isolation, even after extended use
- Pick-up mechanism and Digital Signal Transmission Circuit (DSTC) are physically separated for maximum operating efficiency
- Proprietary transmission circuitries get the most out of audio signals with no loss or audible noise, resulting in a fully involving listening experience
Specifications
Mechanism Philips VAM1210
Audio CD (CD-DA), CD-Recordable (CD-R),
CD-Rewritable (CD-RW)
Outputs 1 AES/EBU (XLR)
1 Coaxial (BNC)
1 Coaxial (RCA)
1 Toslink (optical)
AC mains 100, 120, 220, 230V Selectable
Dimension (WHD) 435 x 94.5 x 345 mm
Weight 7.5 Kg
Finish Options Silver or Olive Black Anodized Aluminum
Stello P200 preamplifier
Features
Dual Monaural Design (Symmetrical) with 2 separate transformers for each channel
Mixed Design with 2 pairs of junction FET(J-FET) and 2paris of Bipolar Transistor on the Input Differential Circuit
Class A push-pull output stage, Full Balanced Operation
Zero Negative feedback circuitry
Full digital volume control with Cirrus Logic CS3310 chip (120 steps)
16 x 2 VFD Display
Bypass input for Surround Processor Application
12V Trigger Output for Automatic Power-On
Specifications
Input Sensitivity 0.56V BA
Signal Output XLR/Balanced 1 pair
RCA/Unbalanced 2 pairs
RCA/REC Output 1 pair
Signal Input RCA/Unbalanced, 4 pairs
XLR/Balanced, 2 Pair
RCA/Bypass, 1 Pair
Front Panel Remote Controller Standby
Switches Input(CD,Tuer, Aux 1, Aux 2, Tape, Balanced1 & 2)
Bypass
Mute
Volume up/down
Display / 4 steps brightness control
STELLO M200 monoblock amplifier


Specifications
Input Sensitivity 0.83V, 200W / 8 Ohm
Signal to Noise 10-20kHz, -100dB
THD 0.005%, at 1 kHz
Frequency Response 10Hz - 50kHz, +-3dB
Signal Input RCA/Unbalanced, 1 Pair
XLR/Balanced, 1 Pair
12 V Trigger (RCA), 1 Ea
Power Output 200W / Ch at 8 Ohm
350W / Ch at 4 Ohm
Power Requiremnets 100/120/220/230VAC, 60Hz Selectable
Dimension(WHD) 230 x 150 x 457(WHD) mm
Weight 12 Kg (each
STELLO DA220 upsampling digital to analog converter


Features
- Supports 44.1kHz/16Bit (Bypass), 48kHz, 96kHz and up to 24bit / 192kHz Upsampling (Sampling Rate Selectable)
- True 24 Bit Delta-Sigma DAC
- Sixth Order Digital Filter
- Digital Outputs for Recording
- Phase Selection : 0, 180 Degree
- On-chip PLL eliminates Jitter
- Separate transformers for analog and digital circuits
- Full Balanced, Full Class A operation Analog Output Modules
- High quality electronic components and gold plated RCA connectors
Specifications
Digital Inputs Coax1, Coax2 (2 RCA Unbalanced) Inputs : 75Ohm
AES/EBU (XLR) Balanced Input: 110Ohm
Toshiba Link Optical Input
Digital Outputs Coax1, Coax2 (2 RCA Unbalanced) Outputs
AES/EBU (XLR) Balanced Output
Toshiba Link Optical Output
Analog Outputs 1 RCA unbalanced stereo, 1 XLR balanced stereo
Analog Output Voltage 1.3 V rms
Output Word Length 16, 18, 20, 24bits
Dynamic Range 110 dB Typ.
Signal-to-noise Ratio 120 dB Typ.
Distortion 0.003 %, 1 kHZ
0.002 %, 10 kHZ
0.002 %, 20 kHZ
Frequency Range 10 Hz - 55 kHz ( +- 3 dB )
Sampling Frequency 44.1kHz to 192kHz, Selectable 192kHz default
Power Requiremnets 100/120/220/230 VAC, 60Hz Selectable
Dimension 435 x 350 x 85 (WHD) mm
Weight 7.5 Kg
STELLO CDT200 CD transport


Features
- Phillips VAM 1210 transport mechanism is proven to be among the most efficient transports available, with improved readability for all CD, CD-R, and CD-RW audio discs
- The transport mechanism is specially mounted to enhance mechanical isolation, even after extended use
- Pick-up mechanism and Digital Signal Transmission Circuit (DSTC) are physically separated for maximum operating efficiency
- Proprietary transmission circuitries get the most out of audio signals with no loss or audible noise, resulting in a fully involving listening experience
Specifications
Mechanism Philips VAM1210
Audio CD (CD-DA), CD-Recordable (CD-R),
CD-Rewritable (CD-RW)
Outputs 1 AES/EBU (XLR)
1 Coaxial (BNC)
1 Coaxial (RCA)
1 Toslink (optical)
AC mains 100, 120, 220, 230V Selectable
Dimension (WHD) 435 x 94.5 x 345 mm
Weight 7.5 Kg
Finish Options Silver or Olive Black Anodized Aluminum
Stello P200 preamplifier



Features
Dual Monaural Design (Symmetrical) with 2 separate transformers for each channel
Mixed Design with 2 pairs of junction FET(J-FET) and 2paris of Bipolar Transistor on the Input Differential Circuit
Class A push-pull output stage, Full Balanced Operation
Zero Negative feedback circuitry
Full digital volume control with Cirrus Logic CS3310 chip (120 steps)
16 x 2 VFD Display
Bypass input for Surround Processor Application
12V Trigger Output for Automatic Power-On
Specifications
Input Sensitivity 0.56V BA
Signal Output XLR/Balanced 1 pair
RCA/Unbalanced 2 pairs
RCA/REC Output 1 pair
Signal Input RCA/Unbalanced, 4 pairs
XLR/Balanced, 2 Pair
RCA/Bypass, 1 Pair
Front Panel Remote Controller Standby
Switches Input(CD,Tuer, Aux 1, Aux 2, Tape, Balanced1 & 2)
Bypass
Mute
Volume up/down
Display / 4 steps brightness control