Gebreselassie
Μαύρος!
- Μηνύματα
- 31.217
- Reaction score
- 3.896
Πωλούνται τα ενεργά ηχεία της B&W σε άριστη κατάσταση στα κουτιά τους. Δεκτή ακρόαση. Τιμή 1100 ευρώ!! Δώρο το κεντρικό ηχείο της ίδιας σειράς B&W CC6S2!!!
The DM605 S2 is the answer to the need for deep, controlled bass extension when there is not the physical room to incorporate a separate subwoofer. An internal 130W amplifier is used to power the two bass drivers to give truly extended bass output. The midrange and tweeter drivers are driven conventionally from the system amplifier, while the two bass drivers are driven by the internal amplifier, which incorporates variable equalisation to give truly extended and tunable bass performance. Bass quality is enhanced by Flowport™ technology, which smoothes the passage of air over both the internal and external port flares to reduce chuffing noises and reduce compression at higher levels. A separate line level LFE input can be driven directly from the subwoofer output of an AV processor.
[align=center]DM605 S2 - Technical Specifications[/align]
Description:
3-way 6th-order vented-box system with active bass
Dimensions:
Height: 996mm (39.2in)
Width: 236mm (9.3in)
Depth: 446mm (17.6in)
Net Weight:
31kg / 68lb
Frequency Response:
25Hz (adjustable) - 20kHz ±3dB on reference axis
Frequency Range:
-6dB at 23Hz and 30kHz
Sensitivity:
91dB spl (2.83V 1m)
Nominal Impedance:
8 ohms (minimum 3 ohms)
Power Handling:
25 - 200W into 8 ohms on unclipped programme
Amplifier:
Power output: 130W continuous
Input impedance: 100,000 ohms
Signal/noise: 91dB
Functions: Bass level
Bass equalisation
LFE phase 0°/180°
Auto-sensing standby/on
Inputs: Speaker level (binding posts)
LFE (RCA Phono)
LFE link to 2nd unit (RCA Phono)
Drive Units:
1x 26mm (1in) metal dome high-frequency
1x 180mm (7in) woven Kevlar® cone midrange
2x 180mm (7in) paper/Kevlar® cone bass
Finish:
Black Ash vinyl
Dispersion:
Within 2dB of response on reference axis
Horizontal: over 40° arc
Vertical: over 10° arc
Harmonic distortion:
2nd & 3rd harmonics
<1% 42Hz - 20kHz (90dB spl, 1m)
Max. recommended cable impedance:
0.1 ohms
Crossover frequencies:
230Hz, 4kHz
