.........πες του ασθενη οτι οταν τραβαμε ακτινογραφιες , κραταμε την αναπνοη μας γιατι η <πλακα> βγαινει θαμπη...........
Κατα τα αλλα ευκολα καποιους που ξερει μπορει να θαψει-αναδειξει οτιδηποτε επρειξε -εθειξε το πορτοφολι του...
Υπερ τουτα (το αντιθετο του κατα τα αλλα) σοβαροτης 0 (μηδεν) (ΜΗΔΕΝ).................
οποτε το να συγκρινεις την λουτσα με την βουρτσα ,,,,,
το μονο κοινο που βρισκει κανεις ειναι οτι και οι δυο εχουν χερουλι......
Κατα τα αλλα ειναι σαν να συγκρινεις το 32αρι με το εξαιρετικα θαυμασιο τρινοβι...........................
η μοναδα του audy , απο την τριτη αναβαθμιση (πολυ πριν το 32αρι) σε αφηνε να χεριασεις κατα βουληση τις καμπυλες .
Το - (οπως λενε και ειναι στο αμερικανικο φορουμ )ειναι οτι ειναι μονο +- 3 db , αν προσθεσεις και τα 2 που κανει καταστολη απο μονη της η μοναδα (οχι τυχαια) πας στα 5 .
Γιατι αυτο ? για να εχεις καποια ασφαλεια, αν συχνοτικα τσιτωσεις ενα ηχειο να κανει αυτα που δεν μπορει (για διαφορους λογους)
ειναι θεμα χρονου ποτε θα γινεις κουμπαρος με τον εισαγωγεα (ανταλλακτικα να πουλα ).
Οποτε μεσα σε καποιους συχνοτικους δρομους , με ασφαλεια κανεις οτι ειναι δυαντο με το σουφτγουερ που σχεδιαστηκε απο τον κυριακακη χολμαν πριν 6-7 χρονια και υλοποιηθηκε απο την dts Και εισαι μαι χαρα.
Αν θες πολλες χαρες πρεπει να βρεξεις λολο...= τρινοβ..........................
περι καρβουνου το αναγνωσμα...κοιτα για τι windows μιλα και θα καταλαβεις πολλα
MultEQ Pro 3.0 can be used with all installer-ready products and offers new features
that include a Target Curve Designer, the ability to Save and Load measurements, and
customization of Dynamic Volume presets. Version 3.0 puts more power in your hands.
It runs on Windows Vista- and XP-equipped computers.
Target Curve Editor
The new version now includes the Target Curve Designer, an easy tool
used to edit target sound curves. Custom curves can be saved and
applied to individual channels. This gives installers a higher degree of
precision and control when calibrating a room.
και εδω οι <ετοιμες> καμπυλες
πες με πoια την συγκριναν ....και ποιος μετρησε με το audyssey
Flat curve creates
equalization filters that
correct the response to
flat, from the low frequency
cutoff point that MultEQ
Pro has determined, to the
upper frequency limit of the
tweeters. This setting must
be used in a THX system in
order to allow THX reequalization
to operate as
it was intended. It is also
recommended for very
small or highly treated
rooms in which the listener
is seated close to the
loudspeakers.
High Frequency Roll Off 1
curve introduces a slight
roll off at high frequencies
that accounts for the
balance between direct and
reflected sound for small to
medium size rooms (room
volume less than 2500 cu.
ft.)
High Frequency Roll Off 2
curve introduces a
slightly greater roll off at
high frequencies,
restoring balance
between direct and
reflected sound for
medium to large size
rooms (room volume
between 2500 and 5000
cu. ft.)
SMPTE 202M curve is an
international standard for
the high frequency roll-off
applied in a typical 500-
seat movie theater. It is
appropriate for
professional mixing spaces
and dubbing stages that
must be calibrated for film
sound postproduction. It
can also be used in
extremely large playback
spaces (room volume
greater than 5000 cu. ft.)