- Μηνύματα
- 1.901
- Reaction score
- 6
A software update (v1.0.35) for the Pace DS810XE High-Definition set-top box is available on the following satellites:
HotBird @ 13.0°E: 12476 H 27500 / PID 1999
Astra 1 @ 19.2°E: 12148 H 27500 / PID 2402
EuroBird 1 @ 28.5°E / Astra 2 @ 28.2°E: 11428 H 27500 / PID 2402
To download the new software please enter the 'Setup menu' and select 'Software update'.
Next select the appropriate satellite and ensure that the transponder parameters match those given above.
Then press <OK> to start the update.
The download will take several minutes, during which time the box should not be turned off.
After the download is complete we recommend resetting the box using the 'Factory Reset' selection in the 'Setup Menu'.
This will erase all the stored user settings. Please note that this step can be omitted, for example if you want to keep your own channel lists.
The main areas of improvement compared with previous software version are as follows:
Correction of 4:3 video display when viewing SD channels on HDMI output in some instances
Greek language added
Improved stability of the application
Improved channel scanning of some satellites
Improved handling of certain CAM modules
Warm regards,
Pace Micro Technology plc
HotBird @ 13.0°E: 12476 H 27500 / PID 1999
Astra 1 @ 19.2°E: 12148 H 27500 / PID 2402
EuroBird 1 @ 28.5°E / Astra 2 @ 28.2°E: 11428 H 27500 / PID 2402
To download the new software please enter the 'Setup menu' and select 'Software update'.
Next select the appropriate satellite and ensure that the transponder parameters match those given above.
Then press <OK> to start the update.
The download will take several minutes, during which time the box should not be turned off.
After the download is complete we recommend resetting the box using the 'Factory Reset' selection in the 'Setup Menu'.
This will erase all the stored user settings. Please note that this step can be omitted, for example if you want to keep your own channel lists.
The main areas of improvement compared with previous software version are as follows:
Correction of 4:3 video display when viewing SD channels on HDMI output in some instances
Greek language added
Improved stability of the application
Improved channel scanning of some satellites
Improved handling of certain CAM modules
Warm regards,
Pace Micro Technology plc