TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Tελικά το μόνο κοινό στοιχείο ανάμεσα στα ΜΚ1 και ΜΚ2 μοιάζει να είναι το χαρακτηριστικό καπάκι με τον υπέροχο τρούλο του η (φυσαλίδα όπως είδα να αναφέρεται αλλού):



Αλλά και εκεί υπάρχει διαφορά στο χρώμα, φυμέ στο MK1 χωρίς χρωματισμό στο ΜΚ2.


:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Αλλά και οι διαστάσεις δείχνουν σχεδόν ίδιες!

MK1: (WxDxH) 45,3 x 36,6 x 18 cm.

MK5: (WxDxH) 45,3 x 35,5 x 17,2 cm

Όπως βλέπουμε ακριβώς ίδιο έχει μείνει μόνο το πλάτος!

Ε, και τι έγινε; Θα μου πείτε.

Από τις δύο διαστάσεις που διαφέρουν μία ιδιαίτερη σημασία έχει η μείωση στην διάσταση του ύψους. Και αφού είπαμε πως το καπάκι είναι ακριβώς ίδιο, (πλην χρώματος), αυτό σημαίνει 0,8 cm χαμηλότερο σασί για τα MK2-MK5.

Kαι βέβαια αυτό μικρή σημασία θα είχε, αν δεν ερχόταν να συνδυαστεί ένας ακόμα παράγοντας: η διαφορά στην κατανάλωση ρεύματος.
ΜΚ1: 4W
MK2: 14W, MK5 13,5W

που εκτός των άλλων παραγόντων, που θα δούμε στην συνέχεια πως επηρεάζει, απαιτεί και την χρήση ογκοδέστερου τροφοδοτικού.

Aποτέλεσμα; Για δείτε πως είναι "κάτω από το τραπέζι" το MK1:




και πως είναι το MK2/5:




Μήπως προσέξατε την παράξενη "εισβολή";


:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Πριν όμως πούμε περισσότερα σχετικά, ας δούμε τι μπορεί να σημαίνει η πολύ μικρή κατανάλωση ρεύματος των 4W η του 0,1W που δίνει η TECHNICS σαν κατανάλωση του ΜJ κινητήρα που διαθέτει το ΟRIGINAL.

Λέει ο ειδικός:

"The DC brushless motor means that running speed is independent of mains voltage and the power consumption is a mere 0-1 watt, or about one hundredth of that of a conventional AC motor. This reduces the risk of hum effects due to stray electromagnetic fields. Total power consumption is only about 4 watts and so heat generation' and possible drying out of lubricants, can be forgotten. "



http://www.gramophone.net/Issue/Page/May%201975/141/788407/The+Technics+SLI300+combines+direct+drive+with+autoplay+facilities+Technics+SL1300+automatic+turntable

A και μία παράκληση: οι εκτός της "Τεχνικής" οικογένειας, ας μην χαίρονται, γιατί έχω... ράμματα για την γούνα τους!:142:



:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Πολύ διαφορετική η εικόνα στο MK1, όπου το τροφοδοτικό είναι σε μεγάλη απόσταση, απομονωμένο κάτω από το σασί, αναρτημένο σε αθάνατου τύπου μαλακά ελαστικά "silent blocks" και πολύ μικρότερο σε όγκο αλλά, κυρίως, και σε επιδράσεις τύπου "hum" στην κεφαλή, ιδιαίτερα αν αυτή είναι κάποια χαμηλοέξοδη mc:





:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Kαι καλά όλα, αυτά θα μου πείτε. Από που προκύπτει ότι το MK2 έχει "θέμα" τροφοδοτικού;



Aπόσπασμα από άρθρο στο περιοδικό "hi-fi world" Αυγούστου 2009:

Εκεί ο David Cowley, κατασκευαστής εξωτερικού τροφοδοτικού για το mk2, εξηγεί:

"On some cartridges, the heavy steel content of the transformer, was changing the sound as the cartridge got closer to the inner grooves and hence closer to the transformer."

Και παρακάτω:

"The trouble with the internal transformer is that it mechanically hums which iw ever so slightly audible through the cartridge. It has an electromagnetic field, also partially audible..."




:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Kαι η άποψη του περιοδικού στα παραπάνω:

"...any TECHNICS SL-1200, (εν. ΜΚ2/5), can substantially improved with the new Stepup PSU."

(συνεχίζεται)



:107:
 

Μηνύματα
5.776
Reaction score
1.187
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Kαι μετά την γκαλερί, μπαίνουμε πάλι σε τεχνικά θέματα, όπως σας έχω προαναγγείλει.

Ας δούμε κατ' αρχήν τα διαγράμματα για τρία μεγίστης σημασίας χαρακτηριστικά ενός πλατώ:rumble, ακρίβεια ταχύτητας, wow & flutter.

Διαγράμματα που πάρα πολλοί άλλοι...μουράτοι κατασκευαστές, όχι απλά δεν τολμούν να δημοσιεύουν, αλλά ούτε καν θέλουν να διαθέτουν, με το πρόσχημα πως τα χαρακτηριστικά αυτά...δεν έχουν σημασία!
+1000!!! Αυτό ξαναπέστο....
 

Μηνύματα
29.875
Reaction score
29.555
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Να σε πω ? την θωράκιση του μετ/στή την είδε ο τύπος?
Λέω τώρα εγω.Οι θωρακίσεις κάνουν αυτή ακριβώς την δουλειά.Θωρακίζουν τυχόν διαφυγές ηλεκτρομαγνητικού πεδίου του μετ.στή.Γιαυτό βρίσκονται εκεί.
Γιαυτό και τις φοράνε και τα μκ2 .
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Ένα άλλο σημείο άξιο προσοχής, είναι η κόντρα servo vs quartz ανάμεσα στα δύο "αδελφάκια".

Λογικά το quartz υπερέχει.

Αλλά ας δούμε μία εύπεπτη συγκριτική και συνοπτική περιγραφή των δύο συστημάτων όπως αυτή γίνεται από ένα νεοφώτιστο, και έτσι είναι "κατάλληλη για όλη την οικογένεια" :

"The "servo" controlled systems are Voltage controlled. A DC Voltage is provided to the motor and the internal tachometer outputs a second Voltage that is representative of the actual speed. The two Voltages/speeds are compared against each other and the control system adjusts the motor control Voltage to accommodate the difference.

The Quartz based system uses a quartz oscillator that is divided down to the frequency to control the motor speed. The internal tachometer reads the speed of the platter and outputs its own frequency that is representative of the actual speed. Both frequencies are compared and the control system adjusts itself until the two frequencies match and are in phase.

The "servo" controlled system is Voltage based and the Quartz based system is frequency based."

http://http://www.vinylengine.com/phpBB2/viewtopic.php?t=27762


:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Έρχεται όμως ο εν λόγω κύριος και τι λέει;

Ιδού:




http://http://www.soundhifi.com/sl1200/index.htm



Εννοείται πως σε ένα κινητήρα servo, δεν τίθεται θέμα phase loop sensor, εφ' όσον απλά κάτι τέτοιο δεν υπάρχει!

(συνεχίζεται)

:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Πάμε τώρα να δούμε ένα άλλο θέμα που λέγεται "damping layer".

Eίναι κάτι που λείπει εντελώς από το MK1.

"Σκέτο":



Στην φυσική του θέση:









:107:
 


Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Mία ανάλυση για τον τρόπο λειτουργίας του:


"The resin block would appear to be likely to be a polyester bulk moulding compound, possibly glass reinforced and probably mineral powder filled for bulk and mass.
Yes, technics no doubt did their homework, however I imagine their intended (and actual) market saw their priority as reducing or eliminating the ingress of vibration to the turntable from external influences (DJ decks work in an unfriendly environment in that respect) rather than controlling resonances emanating from the cartridge/disc interaction.

I see the design as utilising a rubber cradle and flex feet to isolate the playing gear from its support surface and the mass block as being intended to firm up the resilience of that rubber, much as vibrapods and foculpods function most effectively at their designed loading.

The issues I have described arise from generating greater reactive forces during playback than would have been intended or envisioned in the specifications of the arm, which, after all, is of medium mass and intended for medium compliance cartridges.

The main issue to be addressed is the breaking of the mechanical feedback from stylus to record, since this interface is where the reactive forces are generated a mechanical feedback loop exists which passes from the cartridge to the arm to the arm mount to the plinth and hence back to the platter where its effect is magnified.

The means of doing this require the dissipation of this energy at at least one stage of the transmission chain, preferably more.

A heavier arm will absorb more energy without resonating, an overdriven lighter but rigid arm like the RB250 will transmit this energy (the tube will also resonate), fluid damping will help with resonance control, decoupling of the arm from the armboard will also help.

Bonding the mass layer to the plinth seems only likely to be effective if done permanently with something like a flexible polyurethane adhesive sealant (Sikaflex or similar) - since this would preclude access to the electronics it seems impracticable.

Without close coupling of the surfaces either by adhesive bonding or mechanical constraint there will be no CLD effect of energy absorbtion."


http://theartofsound.net/forum/showthread.php?t=2996&page=3


:107:
 

Μηνύματα
4.252
Reaction score
11
Το ΜΚ2 καλύτερο χωρίς το "damping layer"; Όπως λέμε "ORIGINAL";

Και, αν υποθέσουμε ότι αυτό το σκεπτικό είναι σωστό, που καταλήγουμε;

"Tonight I removed the two damping layers from the working turntable and placed the turntable on four springs. I did this to see if removing the Technics damping was a step in the right direction sound wise. I played "Bird on a Wire" by Jennifer Warnes and with the first few notes my ears immediately pricked up.

Well I am impressed! The sound seems to "breathe" better and I can more easily hear into the mix. I guess this means it seems more three dimensional and the soundstage seems deeper. Dare I say the deck sounds more like my belt drive in a good way. There seems to be a bit of bloom or resonnance in the bass which is not unpleasant and the bass goes deep. Hopefully damping the top plate with Isodamp or SDS will fix this.

I could be imagining all this but I have no desire to put the damping back and this is a good sign. When I find my camera USB cable I will put a few pix up - it looks a bit like a Gyrodeck now!"


http://theartofsound.net/forum/showthread.php?t=2996&page=5


:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Αρχίζει να γίνεται γνωστό:

1)"Later in the week I plan to hook the SL-1200 Mk1 up to the main stereo and do some comparisons with my '08 SL-1200 Mk2, using the same cartridge (AT440MLa) and headshell. Some have said that the Mk1 sounds better than the Mk2 because it has less rubber inside the plinth. We shall see."


http://http://db.audioasylum.com/cgi/m.mpl?forum=vinyl&n=684996&highlight=PeterI



Αρχίζει να γίνεται γνωστό:

2)"Handsomely minimalist, better looking than the MKII, and yes it does sound great.

The light(er) plinth design of the MKI table allows for better sound than does the rubber-damped MKII, IMO. Mine is the SL 120 (armless) version.

I have mounted a modded Rega RB250 arm and an OL armboard. Some people avoid the MKI's because they do not have the hyper-accurate quartz-locked drive system of the MKII version.

But I have compared the sound of the MKI and the MKII, in my own listening room and with identical arm/cart, and I can say that the MKI sounds better than the MKII in some ways."



http://www.stevehoffman.tv/forums/showthread.php?t=161927



:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Tελικά, να πως είναι το MK2 χωρίς το "layer":






Για δείτε και το ORIGINAL:



Kαμία σχέση! Τελικά το ΜΚ1 πιο βαριά κατασκευή σασί.

Δείτε π.χ. την σχήματος "Τ" ενίσχυση που υπάρχει σε κάθε "φωληά" βίδας!

Η δείτε την ενίσχυση/απορρόφηση συντονισμών στις γωνίες σε συνδυασμό με τις "φωληές":






:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Kαι εδώ η "χιαστί" ενίσχυση στο "armboard":





Kαι διατί να το κρύψωμεν άλλωστε;



:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Tελικά κάποιοι καταργούν τελείως και την ελαστική βάση, (του MK2):



και καταλήγουν, νομίζω, στην υπερβολή:



ισχυριζόμενοι πως έτσι παίζει πολύ καλύτερα!


:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Ίσως για τα παραπάνω να φταίνε και τα κοντά με μικρή απορροφητικότητα κραδασμών πόδια του MK2:



ενώ,αντίθετα, τα πόδια του MK1, είναι μεγάλου ύψους, έχουν μία, θεωρητική τουλάχιστον, διαδρομή 0,5 cm, βιδώνουν άμεσα στο σασί και όχι στο καπάκι, και, με δυο λόγια, απορροφούν καλύτερα τους κραδασμούς:




:107:
 

Μηνύματα
4.252
Reaction score
11
Απάντηση: TO ORIGINAL TO SL-1200 (OXI MK II) TECHNICS

Και επειδή με όλα αυτά κινδυνεύω να κακοκαρδίσω τους φίλους με τα MK2, άντε να πούμε και ορισμένα σημεία όπου το ΜΚ2 αδιαμφισβήτητα υπερέχει:

1)Bραχίονας.

2)Rumble, wow & flutter, ακρίβεια περιστροφής.

3)Περιστρεφόμενο πλατώ.


(συνεχίζεται)



:107:
 


Staff online

  • abcd
    Πρώην Διοικητής ο τροπαιοφόρος
  • Zizik
    Safety Last

ΣΤΑΤΙΣΤΙΚΑ

Threads
175.886
Μηνύματα
3.032.488
Members
38.514
Νεότερο μέλος
bmavroeidis
Top